What are the problems in the application of welding robots

Release time:

2024-10-05

　　1. Welding deviation issue: It may be due to incorrect welding position or problems finding the welding gun. At this point, it is necessary to consider whether TCP is accurate and make adjustments accordingly. If this situation occurs frequently, it is necessary to check the zero position of each axis of the welding robot and recalibrate it for correction.

　　2. Edge biting problem: It may be due to improper selection of welding parameters, incorrect welding gun angle or welding gun position, which can be adjusted appropriately.

　　3. Pore problem: It may be due to poor gas protection, thick primer on the workpiece, or insufficient drying of the protective gas. Corresponding adjustments can be made to address this issue.

　　4. Excessive spatter problem: It may be due to improper selection of welding parameters, gas composition reasons, or long wire extension length. The welding robot power can be adjusted appropriately to change the welding parameters, the gas proportioner can be adjusted to adjust the mixed gas ratio, and the relative position between the welding gun and the workpiece can be adjusted.

　　5. The problem of forming an arc pit at the end of the weld after cooling: When programmable, adding a buried arc pit function in the work step can fill it up.

PRE

How to correctly start and cut off the power supply of welding robots

How welding robots maintain precision welding

Application of 3D flexible wel

2024-11-19

The three-dimensional flexible welding platform achieves precise welding of comp

Learn More +

What kind of workpiece is suit

2024-10-05

Firstly, the workpiece standardization robot follows a fixed route, and if the workpiece is not standardized, the robot will weld off center.

Learn More +

What are the types of welding

2024-10-05

Pneumatic driven welding robot for switch control and secondary control. Due to the lower viscosity of compressed air, pneumatic transmission is easier to achie...

Learn More +

Promote welding and cutting automation related technologies.

✓ Reply Within 24 Hours

✓ Site Commissioning

✓ Customer Service Staff Provide Attentive Service

✓ OFFICIAL Website: www.xbznjx.com